product qualitybrand new
Sinilink ESP-12F WIFI mobile phone remote controller module 5v-36v smart home phone APP XY-WFMS
Remind:
1. If you use the charger Pal for power supply, please make sure that the charger Pal is always on. Many charger Pal with low current will automatically turn off the output and cannot be used.
Standby power consumption of this product is about 0.5W/5V100MA.
2. Wifi hotspot can only connect to 2.4g frequency. Some routes are connected to 5G and 2.4g.
3. All power off Settings can be saved, and will be connected automatically after power on.
If the wifi hotspot name or password has changed, it needs to be reset
Situations where routes or products need to be restarted to link.
If you encounter this problem, you can replace the WIF hotspot and router
Try)
4. It will not work normally after being disconnected from the Internet. WIF is required to connect to the Internet all the time.
The network can be automatically connected.
5. It is recommended to use a router with stable performance. Otherwise, you may encounter unpredictable problems for a long time, such as failure of the link.
Function description: As long as WF is constant and the phone has a network, the switch can be controlled by APP whenever and wherever.
6. For some poor routers, the connection may drop for a long time. If the router can be restarted and work normally, it is the problem of the router.
(If this is the case, you can find another router to test)
Product advantages:
Using advanced architecture technology to build the system, support tens of millions of users concurrent, stable system, fast speed!
International version, non-mainland China users please use email registration.
This product is MOS switch type. What is the input voltage? What is the output voltage?
Product application:
Can be used for access control system, control motor, fan and other electrical equipment, direct access to the circuit, do remote switch use.
If it is used to control the LED lamp, it is recommended to control the LED lamp above 20W. Since the power consumption of WIFI module is changing, there will be stroboscopic when the low-power LED lamp is used.
Audited Supplier 
){kind=link}
){kind=link}